Diamond Wire Saw for Granite Profiling

Diamond Wire Saw for Granite Profiling

The advantage of the diamond wire for profiling is stable cutting, high performance, smooth cutting face, and accurate of processing ect.

Note: The sawing speed is calculated by sawing depth (mm) per minute

1. The rotation of the wire should be regularly checked
2. The beads wear profile should be regularly inspected
3. The connections should be changed whenever excessively high wear of the adjacent beads is noted and whenever it is necessary to apply pretorsion to the cable
4. The cable tension is set to 250-300kg(4-5mmdiameter cable)
5. Adiust the liner speed of the wire to the material being sawn:
     Granite class 1—2: 25—30m/s
     Granite class 3—4: 22—26m/s
     Granite class  5: 20—24m/s
     Marble: 30—35m/s
     Abrasive stone: 30—35m/s
6. During the sharpening of a new wire ,the liner speed must be reduced by 2-3m/s
7. Water spraying between 15-25L/min